UK Kitchen Doors
Transforming kitchens since 1990

Build Your Replacement List

Get everything measured and listed ready for a quote

Before You Start

This tool will help you create a complete list of everything you need for your kitchen door replacement project.

You'll need:

  • A tape measure (measuring in mm)
  • Paper and pen for your sketch
  • About 20-30 minutes

The Sketch Method

The best way to avoid mistakes is to sketch your kitchen first:

  • Draw front views of each wall with units on it
  • Number your doors (1, 2, 3...)
  • Letter your drawer fronts (A, B, C...)
  • Mark panels and plinth at the ends
  • Tick off each item on your sketch as you enter it
Example kitchen sketch

Pro tip

As you measure each item, tick it off on your sketch. Group identical sizes together - if doors 1, 3 and 5 are all the same, enter the size once with quantity 3.

Back

Count Your Items

Tap each section to expand. Add what applies to your kitchen.

Wall unit doorsUpper cabinets
0
Base unit doorsLower cabinets
0
Tall unit doorsLarder, oven housing, broom cupboard
0
Glazed doorsDoors with glass panels
0
Drawer frontsIncluding oven filler panels
0
Standard handlesMetal bar or bow style
0
Designer handlesPewter ranges and premium styles
0
Handle prices are approximate due to the variety of styles available.

Blum soft-close clip-on. 2 per standard door, 3 per tall door over 850mm.

18mm Carcass

110° hinge + plateStandard opening
0
165° hinge + plateWide opening
0

15mm Carcass

110° hinge + plateStandard opening
0
165° hinge + plateWide opening
0

Cover visible ends of cabinets to match your doors

Wall unit end panels
0
Base unit end panels
0
Tall unit end panels
0

Filler Strips

100mm wide strips for gaps - edged all round

Filler 720 × 100mmBase unit height
0
Filler 900 × 100mmWall unit height
0
Filler 2150 × 100mmTall unit height
0

Plinth / Kickboard

Around base of floor units. 2.8m lengths. Type to change the height.

Plinth height
mm (100-250)
Plinth lengths (2.8m)
0

Decorative Trim

Cornice (2.8m)Top of wall units
0
Pelmet (2.8m)Under wall units
0
Combi cornice/pelmet (2.8m)Suitable for top or bottom of wall units
0

Corner Post Kits

For L-shaped corners. Kit = 2 edged strips.

720 × 100mm kitWall unit height
0
900 × 100mm kitBase unit height
0
2150 × 100mm kitTall unit height
0

Vinyl & Edging

Self-adhesive vinyl650mm wide, by the metre
m
Iron-on edging tape20mm wide, by the metre
m

Blum Tandembox Antaro soft-close. Lifetime warranty.

Internal (complete kit inc. front)

SpaceTower 5-packTall larder (4 deep + 1 shallow)
0
Base unit 3-pack2 deep + 1 shallow
0
Internal shallow
0
Internal deep
0

External (box only - no front)

External shallowCutlery drawers
0
External deepPan drawers
0
Under-oven drawer600 oven housing
0
Total fascias (doors + drawer fronts): 0
Back

Door Measurements

Measure each door - height first, then width. Measure the back of the door, not the front (edges may be profiled).

💡 Measure the door, not the unit

Doors are typically 4mm smaller than the cabinet. If you measure the cabinet and order that size, the doors won't fit properly.

Doors measured: 0 of 0
Back

Drawer Front Measurements

Measure each drawer front - height first, then width. Include oven filler panels here too.

Drawer fronts measured: 0 of 0
Back

End Panel Measurements

Measure each end panel - height first, then width. These cover the visible ends of your cabinets.

Panels measured: 0 of 0
Back

Glazed Door Measurements

Measure each glazed door - height first, then width. Made-to-measure sizes available.

Glazed doors measured: 0 of 0

🍷 Wine racks & open units

These are available in any size and quoted by request as an add-on to your order. Just mention what you need when requesting your quote.

Back

Your Kitchen Refurb List

Here's everything you've entered. Check it matches your sketch!

📧 Send Your List For a Quote

We'll review your list and email you a detailed quote, usually within 24 hours.

─────── or keep a copy for yourself ───────

💡 What happens next?

We'll review your list, check for any potential issues, and provide a detailed quote. We'll confirm hinge positions and any other details before you order.